Use this mode for all standard charging applications. You can setup the unit to perform one peak or two peaks. You can setup the auto repeak delay time within the USER SETUP MODE. To turn off the 2nd peak, set the repeak delay time to zero.
Fuzzy Logic
This charge mode is especially useful for packs with a partial charge. The unit would first discharge your pack according to your preset discharge rate and then fully charge your pack
.Partial..
Use this mode only for Ni-MH cell(s). Certain Ni-MH batteries require a partial charge for long term storage. You can program the amount of partial charge in the USER SETUP MODE. 10 to 30% usually good for Ni-MH battery.
Boosting..
This mode is developed for racing application. You can get the most capacity and power from your batteries using this boosting function. The unit first partial discharge your pack momentarily follow by a preprogrammed fast charge, this increase battery temperature as well as it's overall voltage output. We suggest that you only use this boosting feature when your pack is cool. Never use the Boosting function when your pack is still warm.
ADD Specification
LCD.................................................... 2x16characters INDIGO Blue backlit LCD display
BUTTONS......................................... Surface Panel Type Battery
IR ......................................... mOhm
Auto Repeak..................................... On/Off 1-60 Minutes(1minute step)
Partial Charge ................................. 10-50%(10% step)
Alarm Sound..................................... 6 Ring Tones (user selectable)
Case Size............................................ 6.14"x 4.80"x 1.77" (15.6x12.2 4.5cm)
Weight................................................ 24.54ounces(695g)
Input Voltage(Power Source)......... 11.5-15 Volts DC
Charge Battery Capacity................. 50-6000mA (50mA step)
Charge rate(Super linear)............... 0.1-7.0A(0.1A step)
Auto Trickle ...................................... ON/OFF
Auto Trickle Value Discharge Rate................................. 0.1-20.0A(0.1V step)
Volt Threshold................................... 3-20mV/cell for Ni-CD,3-15mV/cell for Ni-MH,
Cycle Number.................................... 1-9 times(1 time step)
Delay Time For After Charge......... 1-10 Minutes(1 Minutes step)
Delay Time For After Discharge.... 1-60 Minutes(1 Minutes step)